Our Operators and Equipment
All our vans carry concrete cutting and coring gear so when we attend a core drilling job we can also complete any other sawing works that may be required.
Our vans carry the following equipment every day of the week:
1x Road Saw
– Equipped with blades to cut to 375mm2x Hand Saws
– Equipped with blades to cut to 155mm1x Ring Saw
– For those jobs that require that bit of extra depth1x Large Core Drill
– Equipped with core bits to drill 125mm holes to 250mm holes on walls and slabs at any angle required1x Small Core Drill
– Equipped with core bits to drill 18mm holes to 125mm holes on walls and slabs at any angle required1x Hand held Core Drill
– For drilling of core holes from 18mm holes to 75mm holes in those hard to reach or tight access areas1x Wet Vac
- For removal of concrete slurry and water from works area1x Pump Bottle
– For works where water is hard to find
All of our vans and equipment are taken back to the workshop on a regular basis (at least once a week) where all equipment is checked and all blades, cores, consumables and PPE are replenished so when our trained operators and van turn up on-site they are fully stocked and all equipment is ready to go, hence no downtime.
Upon request we can also provide the following equipment:
Electric Road saws
- For sawing in poorly ventilated areas8400 Road saw
- For road sawing down to 650mmHigh frequency/Electric hand and ring
saws
- For sawing in poorly ventilated areasHigh frequency core drill
– For inverted and large diameter core drillingWall saws
- for cutting walls and slabs thicker than 275mmWire saws
- For cutting 700mm+ slabs, footings, or wallsWater Tanker with pump
– Required for on site works out on the road or demolition sitesGenerators to run any of our gear if required
Aluminum Scaffolds
– Platform heights from 500mm to 3mCatch decks
-For removal of suspended slabsDemolition equipment
-For removal of concrete, Skid Steers or ExcavatorsDisposal of concrete slurry and waste